InteliLite 9 Global Guide
182
Setpoint group Engine settings Related FW 1.1.0
Range [units] the range is defined by analog sensor curve
Default value
the value is defined by
analog sensor curve
Alternative config NO
Step the step is defined by analog sensor curve
Comm object 12780 Related applications AMF, MRS
Config level Standard
Setpoint visibility Visible only if the logical analog input COOLANT TEMP (PAGE 353) is configured
Description
Shutdown or BOC threshold level for COOLANT TEMP (PAGE 353).
Coolant Temperature Sd
6 back to List of setpoints
Setpoint group Engine settings Related FW 1.1.0
Range [units] 0 .. 900 [s]
Default value 5 s Alternative config NO
Step 1 s
Comm object 14342 Related applications AMF, MRS
Config level Standard
Setpoint visibility Visible only if the logical analog input COOLANT TEMP (PAGE 353) is configured
Description
Delay for COOLANT TEMP (PAGE 353).
Coolant Temperature Delay
6 back to List of setpoints
Setpoint group Engine settings Related FW 1.1.0
Range [units] the range is defined by ECU sensor curve
Default value
the value is defined by
ECU sensor curve
Alternative config NO
Step the step is defined by ECU sensor curve
Comm object 14429 Related applications AMF, MRS
Config level Standard
Setpoint visibility Visible only if ECU is configured
Description
Warning threshold level for Coolant temperature which is send from ECU.
ECU Coolant Temperature Wrn
6 back to List of setpoints
To Next Page
Loading...
Need help?
General
