InteliLite 9 Global Guide
180
Setpoint group Engine settings Related FW 1.1.0
Range [units] the range is defined by analog sensor curve
Default value
the value is defined by
analog sensor curve
Alternative config NO
Step the step is defined by analog sensor curve
Comm object 12779 Related applications AMF, MRS
Config level Standard
Setpoint visibility Visible only if the logical analog input OIL PRESSURE (PAGE 355) is configured
Description
Shutdown threshold level for OIL PRESSURE (PAGE 355).
Oil Pressure Sd
6 back to List of setpoints
Setpoint group Engine settings Related FW 1.1.0
Range [units] 0 .. 900 [s]
Default value 3 s Alternative config NO
Step 1 s
Comm object 14341 Related applications AMF, MRS
Config level Standard
Setpoint visibility Visible only if the logical analog input OIL PRESSURE (PAGE 355) is configured
Description
Delay for OIL PRESSURE (PAGE 355).
Oil Pressure Delay
6 back to List of setpoints
Setpoint group Engine settings Related FW 1.1.0
Range [units] the range is defined by ECU sensor curve
Default value
the value is defined by
ECU sensor curve
Alternative config YES
Step the step is defined by ECU sensor curve
Comm object 14426 Related applications AMF, MRS
Config level Standard
Setpoint visibility Visible only if ECU is configured
Description
Warning threshold level for Oil pressure which is send from ECU.
ECU Oil Pressure Wrn
6 back to List of setpoints
To Next Page
Loading...
Need help?
General
