InteliLite 9 Global Guide
45
5 Controller setup
5.1 Default configuration 45
5.2 Controller configuration and PC tools connection 46
5.3 Operator Guide 50
5.4 Functions 74
6 back to Table of contents
5.1 Default configuration
5.1.1 Binary inputs AMF
Number Description Configured function
BIN1 Generator circuit breaker feedback GCB FEEDBACK (PAGE 307)
BIN2 Mains circuit breaker feedback MCB FEEDBACK (PAGE 309)
BIN3 Switch controller to OFF mode REMOTE OFF (PAGE 311)
BIN4 Switch controller to TEST mode REMOTE TEST (PAGE 313)
BIN5 Suppression of alarms SD OVERRIDE (PAGE 313)
BIN6 Binary input function used as alarm BIN PROTECTION 1 (PAGE 296)
5.1.2 Binary outputs AMF
Number Description Function
BOUT1 Starter motor control STARTER (PAGE 344)
BOUT2 Fuel solenoid valve FUEL SOLENOID (PAGE 326)
BOUT3 Generator circuit breaker control GCB CLOSE/OPEN (PAGE 327)
BOUT4 Mains circuit breaker control MCB CLOSE/OPEN (PAGE 335)
BOUT5 Activation of any devices before start PRESTART (PAGE 341)
BOUT6 Indication of unconfirmed alarm ALARM (PAGE 322)
5.1.3 Binary inputs MRS
Number Description Function
BOUT1 Start and stop the gen-set in AUTO mode. REMOTE START/STOP (PAGE 312)
BOUT2 Generator circuit breaker feedback GCB FEEDBACK (PAGE 307)
BOUT3 Switch controller to OFF mode REMOTE OFF (PAGE 311)
BOUT4 Switch controller to AUTO mode REMOTE AUTO (PAGE 310)
BOUT5 Suppression of alarms SD OVERRIDE (PAGE 313)
BOUT6 Binary input function used as alarm BIN PROTECTION 1 (PAGE 296)
To Next Page
Loading...
Need help?
General
