1-10
1-5 Applicable Standards
1
Features and System Configuration
1-5 Applicable Standards
EC Directives
Note To conform to EMC Directives, the Servomotor and Servo Drive must be installed under the conditions
described in Wiring Conforming to EMC Directives on page 4-27.
UL and CSA Standards
*1 The approval of UL and cUL is pending for motor capacities of 6 to 7.5 kW.
EC Directive Product Applicable standards Comments
Low Voltage
Directive
AC Servo Drive EN 50178
Safety requirements for electrical equipment for
measurement, control, or laboratory use
AC Servomotor IEC 60034-1/-5 Rotating electrical machines
EMC Directive AC Servo Drive
EN 55011 Class A Group1
Limits of radio disturbance and measurement
methods for industrial, scientific, and medical
radio-frequency equipment
EN 61000-6-2
Electromagnetic compatibility (EMC) Immunity
standard for industrial environments
IEC 61000-4-2 Electrostatic discharge immunity testing
IEC 61000-4-3 Radio frequency radiation field immunity testing
IEC 61000-4-4 Electrical fast transient burst immunity testing
IEC 61000-4-5 Lightning surge immunity testing
IEC 61000-4-6 High-frequency conduction immunity testing
IEC 61000-4-11 Momentary power interruption immunity testing
Standard Product Applicable standards File number Comments
UL
standard
AC Servo Drive UL 508C E179149 Power conversion equipment
AC Servomotor
*1
UL1004-1 E331224 Electric motor
CSA
standard
AC Servomotors
*1
CSA22.2 No.100 E179189 Motor and generator
To Next Page
Loading...
Need help?
General
