Cisco 300 Series User Manual

Telnet, Secure Shell (SSH) and Secure Login (Slogin) Commands
1007 OL-32830-01 Command Line Interface Reference Guide
52
no ip ssh port
Parameters
• port-number —Specifies the TCP port number to be used by the SSH
server. (Range: 1–65535).
Default Configuration
The default TCP port number is 22.
Command Mode
Global Configuration mode
Example
The following example specifies that TCP port number 8080 is used by the SSH
server.
switchxxxxxx(config)# ip ssh port 8080
52.4 ip ssh password-auth
Use the ip ssh password-auth Global Configuration mode command to enable
password authentication of incoming SSH sessions.
Use the no form of this command to disable this function.
Syntax
ip ssh password-auth
no ip ssh password-auth
Default Configuration
Password authentication of incoming SSH sessions is disabled.
Command Mode
Global Configuration mode

Cisco 300 Series Specifications

General

Brand	Cisco
Model	300 Series
Category	Switch
Language	English