Voice VLAN Commands
OL-32830-01 Command Line Interface Reference Guide 1104
57
Default Configuration
46
Command Mode
Global Configuration mode
Example
The following example sets 63 as the voice VLAN DSCP.
switchxxxxxx(config)#
voice vlan dscp
63
For Auto Voice VLAN, changes in the voice VLAN ID, CoS/802.1p, and/or DSCPwill
cause the switch to advertise the administrative voice VLAN as static voice
VLANwhich has higher priority than voice VLAN learnt from external sources.
Are you sure you want to continue? (Y/N)[Y]
Y
30-Apr-2011 00:31:07 %VLAN-W-BestLocal!=Oper: inconsistency detected, VSDP voice
VLAN configuration differs from best local. Best local is Voice VLAN-ID 104, VPT
7, DSCP 46
switchxxxxxx(config)# 30-Apr-2011 00:31:22 %VLAN-I-ReceivedFromVSDP: Voice VLAN
updated by VSDP. Voice VLAN-ID 104, VPT 7, DSCP 63
57.8 voice vlan oui-table
To configure the voice OUI table, use the voice vlan oui-table Global Configuration
mode command. To restore the default configuration, use the no form of this
command.
Syntax
voice vlan oui-table
{add mac-address-prefix | remove mac-address-prefix}
[
text
]
no voice vlan oui-table
Parameters
• add
mac-address-prefix
—Adds the specified MAC address prefix to the
voice VLAN OUI table (length: 3 bytes).
• remove
mac-address-prefix
—Removes the specified MAC prefix address
from the voice VLAN OUI table (length: 3 bytes).
To Next Page
Loading...
Need help?
General