Cisco 300 Series User Manual

Telnet, Secure Shell (SSH) and Secure Login (Slogin) Commands
OL-32830-01 Command Line Interface Reference Guide 1014
52
Example
The following example displays the SSH server configuration.
The following table describes the significant fields shown in the display.
52.10 show crypto key pubkey-chain ssh
The show crypto key pubkey-chain ssh Privileged EXEC mode command displays
SSH public keys stored on the device.
Syntax
show crypto key pubkey-chain ssh [username username ] [fingerprint
{bubble-babble | hex}]
switchxxxxxx# show ip ssh
SSH server enabled. Port: 22
RSA key was generated.
DSA (DSS) key was generated.
SSH Public Key Authentication is enabled with auto-login.
SSH Password Authentication is enabled.
Active incoming sessions:
IP Address
---------
172.16.0.1
SSH Username
-----------
John Brown
Version
-------
1.5
Cipher
------
3DES
Auth Code
----------
HMAC-SHA1
182.20.2.1 Bob Smith 1.5 3DES Password
Field Description
IP Address The client address
SSH Username The user name
Version The SSH version number
Cipher The encryption type (3DES, Blowfish, RC4)
Auth Code The authentication Code (HMAC-MD5,
HMAC-SHA1) or Password

Cisco 300 Series Specifications

General

Brand	Cisco
Model	300 Series
Category	Switch
Language	English