Auto-Update and Auto-Configuration
191 OL-32830-01 Command Line Interface Reference Guide
6
•
extension
—The SCP file extension. When no value is specified, 'scp' is used.
(Range: 1-16 characters)
Default Configuration
Enabled by default with the auto option.
Command Mode
Global Configuration mode
User Guidelines
The TFTP or SCP protocol is used to download/upload an image file.
Examples
Example 1—The following example specifies the auto mode and specifies "scon"
as the SCP extension:
switchxxxxxx#
boot host auto-update auto scon
Example 2—The following example specifies the auto mode and does not provide
an SCP extension. In this case "scp" is used.
switchxxxxxx#
boot host auto-update auto
Example 3—The following example specifies that only the SCP protocol will be
used:
switchxxxxxx#
boot host auto-update scp
6.3 show boot
Use the show boot Privilege EXEC mode command to show the status of the IP
DHCP Auto Config process.
Syntax
show boot
To Next Page
Loading...
Need help?
General