Link Layer Discovery Protocol (LLDP) Commands
OL-32830-01 Command Line Interface Reference Guide 678
30
30.28 show lldp statistics
To display LLDP statistics on all ports or a specific port, use the show lldp
statistics EXEC mode command.
Syntax
show lldp statistics
[interface-id | detailed
]
Parameters
• interface-id—(Optional) Specifies the port ID.
• detailed—(Optional) Displays information for non-present ports in addition
to present ports.
Default Configuration
If no port ID is entered, the command displays information for all ports. If detailed is
not used, only present ports are displayed.
Command Mode
User EXEC mode
Example
switchxxxxxx#
show lldp statistics
Tables Last Change Time: 14-Oct-2010 32:08:18
Tables Inserts: 26
Tables Deletes: 2
Tables Dropped: 0
Tables Ageouts: 1
TX Frames RX Frame RX TLVs RX Ageouts
Port Total Total Discarded Errors Discarded Unrecognized Total
----- ---- ----- --------- --------- --------- --------- ------------
gi11 730 850 0 0 0 0 0
gi12 0 0 0 0 0 0 0
gi13 730 0 0 0 0 0 0
To Next Page
Loading...
Need help?
General