Cisco 300 Series User Manual

Quality of Service (QoS) Commands
751 OL-32830-01 Command Line Interface Reference Guide
39
Default Configuration
All policy-maps are displayed.
Command Mode
Privileged EXEC mode
Example
The following example displays all policy maps.
switchxxxxxx(config)# show policy-map
Policy Map policy1
class class1
set IP dscp 7
Policy Map policy2
class class 2
police 96000 4800 exceed-action drop
39.10 trust
Use the trust Policy-map Class Configuration mode. command to configure the
trust state. Use the no form of this command to return to the default trust state.
Syntax
trust
no trust
Parameters
N/A
Default Configuration
The default state is according to the mode selected in the qos command
(advanced mode). The type of trust is determined in qos advanced-mode trust.

Cisco 300 Series Specifications

General

Brand	Cisco
Model	300 Series
Category	Switch
Language	English