Cisco 300 Series User Manual

Ethernet Configuration Commands
OL-32830-01 Command Line Interface Reference Guide 408
18
18.21 show interfaces description
To display the description for all configured interfaces or for a specific interface,
use the show interfaces description Privileged EXEC mode command.
Syntax
show interfaces description
[interface-id | detailed ]
Parameters
• interface-id—(Optional) Specifies an interface ID. The interface ID can be
one of the following types: Ethernet port or port-channel.
• detailed—(Optional) Displays information for non-present ports in addition
to present ports.
Default Configuration
Display description for all interfaces. If detailed is not used, only present ports are
displayed.
Command Mode
Privileged EXEC mode
Example
The following example displays the description of all configured interfaces.
switchxxxxxx# show interfaces description
Port
-----
gi1 1
gi1 2
gi1 3
gi1 4
Descriptions
---------------------------------------------
Port that should be used for management only
PO
----
Po1
Description
-----------
Output

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48