Cisco 300 Series User Manual

802.1X Commands
OL-32830-01 Command Line Interface Reference Guide 48
2
2.4 data
To specify web-based page customization, the data command in Web-Based
Page Customization Configuration mode is used.
Syntax
data
value
Parameters
• value —String of hexadecimal digit characters up to 320 characters.
Default Configuration
No user customization.
Command Mode
Web-Based Page Customization Configuration mode
User Guidelines
The command should not be entered or edited manually (unless using
copy-paste). It is a part of the configuration file produced by the switch.
A user can only customize the web-based authentication pages by using the WEB
interface.
Examples
Example 1—The following example shows a partial web-based page
customization configuration:
switchxxxxxx(config)# dot1x page customization
switchxxxxxx(config-web-page)# data 1feabcde
switchxxxxxx(config-web-page)# data 17645874
switchxxxxxx(config-web-page)# exit
Example 2—The following example shows how Web-Based Page customization is displayed when
running the show running-config command:

Cisco 300 Series Specifications

General

Brand	Cisco
Model	300 Series
Category	Switch
Language	English