57
OL-32830-01 Command Line Interface Reference Guide 1091
Voice VLAN Commands
1
57.1 show voice vlan
To display the voice VLAN status for all interfaces or for a specific interface if the
voice VLAN type is OUI, use the show voice vlan Privileged EXEC mode command.
Syntax
show voice vlan [type {
oui
[{
interface-id | detailed
}] |
auto
}]
Parameters
• type oui—(Optional) Common and OUI-voice-VLAN specific parameters are
displayed.
• type auto—(Optional) Common and Auto Voice VLAN-specific parameters
are displayed.
• interface-id—(Optional) Specifies an Ethernet port ID.
• detailed—(Optional) Displays information for non-present ports in addition
to present ports.
Default Configuration
If the type parameter is omitted the current Voice VLAN type is used.
If the interface-id parameter is omitted then information about all present
interfaces is displayed. If detailed is used, non-present ports are also displayed.
Command Mode
Privileged EXEC mode
User Guidelines
Using this command without parameters displays the current voice VLAN type
parameters and local and agreed voice VLAN settings.
To Next Page
Loading...
Need help?
General