Cisco 300 Series User Manual

Authentication, Authorization and Accounting (AAA) Commands
OL-32830-01 Command Line Interface Reference Guide 92
3
no enable authentication
Parameters
• default—Uses the default list created with the aaa authentication enable
command.
• list-name —Uses the specified list created with the aaa authentication
enable command.
Default Configuration
default.
Command Mode
Line Configuration Mode
Examples
Example 1 - The following example specifies the authentication method as the
default method when accessing a higher privilege level from a console.
switchxxxxxx(config)# line console
switchxxxxxx(config-line)# enable authentication default
Example 2 - The following example sets a list of authentication methods for
accessing higher privilege levels.
switchxxxxxx(config)# aaa authentication enable enable-list radius none
switchxxxxxx(config)# line console
switchxxxxxx(config-line)# enable authentication enable-list
3.5 ip http authentication
The ip http authentication Global Configuration mode command specifies
authentication methods for HTTP server access. Use the no form of this command
to restore the default authentication method.

Cisco 300 Series Specifications

General

Brand	Cisco
Model	300 Series
Category	Switch
Language	English