Cisco 300 Series User Manual

55
OL-32830-01 Command Line Interface Reference Guide 1032
User Interface Commands
55.0
55.1 banner exec
To specify and enable a message to be displayed after a successful logon, use the
banner exec Global Configuration mode command. This banner is applied
automatically on all the user interfaces: console, Telnet and SSH and also on the
WEB GUI. To delete the existing EXEC banner, use the no form of this command.
Syntax
banner exec
d message-text d
no banner exec
Parameters
• d—Delimiting character of user’s choice—a pound sign (#), for example.
You cannot use the delimiting character in the banner message.
• message-text—The message must start in a new line. You can enter
multi-line messages. You can include tokens in the form of $(token) in the
message text. Tokens are replaced with the corresponding configuration
variable (see User Guidelines). The message can contain up to 1000
characters (after every 510 characters, press <Enter> to continue).
Default Configuration
Disabled (no EXEC banner is displayed).
Command Mode
Global Configuration mode
User Guidelines
Follow this command with one or more blank spaces and a delimiting character of
your choice. Then enter one or more lines of text, terminating the message with
the second occurrence of the delimiting character.

Cisco 300 Series Specifications

General

Brand	Cisco
Model	300 Series
Category	Switch
Language	English