Cisco 300 Series User Manual

Authentication, Authorization and Accounting (AAA) Commands
109 OL-32830-01 Command Line Interface Reference Guide
3
3.17 passwords aging
Use the passwords aging Global Configuration mode command to enforce
password aging. Use the no form of this command to return to default.
Syntax
passwords aging
days
no passwords aging
Parameters
• days —Specifies the number of days before a password change is forced.
You can use 0 to disable aging. (Range: 0–365).
Default Configuration
180
Command Mode
Global Configuration mode
User Guidelines
Aging is relevant only to users of the local database with privilege level 15 and to
enable a password of privilege level 15.
To disable password aging, use passwords aging 0.
Using no passwords aging sets the aging time to the default.
Example
The following example configures the aging time to be 24 days.
switchxxxxxx(config)# passwords aging 24
3.18 show passwords configuration
The show passwords configuration Privileged EXEC mode command displays
information about the password management configuration.

Cisco 300 Series Specifications

General

Brand	Cisco
Model	300 Series
Category	Switch
Language	English