Cisco 300 Series User Manual

System Management Commands
983 OL-32830-01 Command Line Interface Reference Guide
50
Syntax
show reload
Parameters
This command has no arguments or keywords.
Default Usage
None
Command Mode
Privileged EXEC mode
User Guidelines
You can use this command to display a pending software reload. To cancel a
pending reload, use this command with the cancel parameter.
Example
The following example displays that reboot is scheduled for 00:00 on Saturday,
April-20.
switchxxxxxx> show reload
Reload scheduled for 00:00:00 UTC Sat April 20 (in 3 hours and 12 minutes)
50.13 show sessions
To display open Telnet sessions, use the show sessions EXEC mode command.
Syntax
show sessions
Parameters
This command has no arguments or keywords.
Default Usage
None

Cisco 300 Series Specifications

General

Brand	Cisco
Model	300 Series
Category	Switch
Language	English