Cisco 300 Series User Manual

Address Table Commands
OL-32830-01 Command Line Interface Reference Guide 176
5
Example
The following example displays the Multicast bridging mode for all VLANs
switchxxxxxx# show bridge multicast mode
5.29 show bridge multicast address-table
To display Multicast MAC addresses or IP Multicast address table information, use
the show bridge multicast address-table Privileged EXEC mode command.
Syntax
show bridge multicast address-table
[vlan vlan-id]
show bridge multicast address-table [vlan vlan-id] [address
mac-multicast-address] [format {ip | mac}]
show bridge multicast address-table [vlan vlan-id] [address
ipv4-multicast-address] [source ipv4-source-address]
show bridge multicast address-table [vlan vlan-id] [address
ipv6-multicast-address] [source ipv6-source-address]
Parameters
• vlan-id vlan-id —(Optional) Display entries for specified VLAN ID.
• address—(Optional) Display entries for specified Multicast address. The
possible values are:
- mac-multicast-address—(Optional) Specifies the MAC Multicast
address.
VLAN IPv4 Multicast Mode IPv6 Multicast Mode
Admin Oper Admin Oper
----- ----------- ----------- ----------- -----------
1 MAC-GROUP MAC-GROUP MAC-GROUP MAC-GROUP
11 IPv4-GROUP IPv4-GROUP IPv6-GROUP IPv6-GROUP
12 IPv4-SRC-
GROUP
IPv4-SRC-
GROUP
IPv6-SRC-
GROUP
IPv6-SRC-
GROUP

Cisco 300 Series Specifications

General

Brand	Cisco
Model	300 Series
Category	Switch
Language	English