802.1X Commands
OL-32830-01 Command Line Interface Reference Guide 52
2
User Guidelines
Use the dot1x guest-vlan enable command to enable unauthorized users on an
interface to access the guest VLAN.
A device can have only one global guest VLAN.
The guest VLAN must be a static VLAN and it cannot be removed.
The Default VLAN cannot be configured as guest VLAN.
An unauthorized VLAN cannot be configured as guest VLAN.
The guest VLAN cannot be configured on a monitoring port.
Example
The following example defines VLAN 2 as a guest VLAN.
switchxxxxxx(config)#
interface
vlan
2
switchxxxxxx(config-if)#
dot1x guest-vlan
2.8 dot1x guest-vlan enable
Use the dot1x guest-vlan enable Interface Configuration mode command to
enable unauthorized users on the access interface to the guest VLAN. Use the no
form of this command to disable access.
Syntax
dot1x guest-vlan enable
no dot1x guest-vlan enable
Parameters
N/A
Default Configuration
The default configuration is disabled.
Command Mode
Interface (Ethernet) Configuration mode
To Next Page
Loading...
Need help?
General