Cisco 300 Series User Manual

SYSLOG Commands
955 OL-32830-01 Command Line Interface Reference Guide
49
49.2 clear logging
To clear messages from the internal logging buffer, use the clear logging
Privileged EXEC mode command.
Syntax
clear logging
Parameters
This command has no arguments or keywords.
Default Configuration
None
Command Mode
Privileged EXEC mode
Example
The following example clears messages from the internal logging buffer.
switchxxxxxx# clear logging
Clear Logging Buffer ? (Y/N)[N]
49.3 clear logging file
To clear messages from the logging file, use the clear logging file Privileged EXEC
mode command.
Syntax
clear logging file
Parameters
This command has no arguments or keywords.

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48