Cisco 300 Series User Manual

Virtual Local Area Network (VLAN) Commands
1053 OL-32830-01 Command Line Interface Reference Guide
56
56.2 vlan
Use the vlan VLAN Configuration mode or Global Configuration mode command to
create a VLAN. Use the no form of this command to delete the VLAN(s).
Syntax
vlan
vlan-range
no vlan vlan-range
Parameters
• vlan-range —Specifies a list of VLAN IDs. Separate nonconsecutive VLAN
IDs with a comma and no spaces. Use a hyphen to designate a range of IDs
(range: 2-4094).
Default Configuration
VLAN 1 exists by default.
Command Mode
VLAN Database Configuration mode
User Guidelines
To assign the VLAN a name, use the name command in Interface Configuration
(VLAN) mode.
Example
The following example creates VLANs 100 and 1972.
switchxxxxxx(config)# vlan database
switchxxxxxx(config-vlan)# vlan 100,1972
switchxxxxxx(config-vlan)# exit
56.3 show vlan
Use the show vlan Privileged EXEC mode command to display the following VLAN
information.

Cisco 300 Series Specifications

General

Brand	Cisco
Model	300 Series
Category	Switch
Language	English