Cisco 300 Series User Manual

Address Table Commands
167 OL-32830-01 Command Line Interface Reference Guide
5
Default Configuration
For dynamic addresses, if interface-id is not supplied, all dynamic entries are
deleted.
Command Mode
Privileged EXEC mode
Examples
Example 1 - Delete all dynamic entries from the FDB.
switchxxxxxx# clear mac address-table dynamic
Example 2 - Delete all secure entries from the FDB learned on secure port gi11.
switchxxxxxx# clear mac address-table secure interface gi11
5.21 mac address-table aging-time
To set the aging time of the address table, use the mac address-table aging-time
Global configuration command. To restore the default, use the no form of this
command.
Syntax
mac address-table aging-time
seconds
no mac address-table aging-time
Parameters
seconds—Time is number of seconds. (Range:10-630)
Default Configuration
300
Command Mode
Global Configuration mode

Cisco 300 Series Specifications

General

Brand	Cisco
Model	300 Series
Category	Switch
Language	English