Address Table Commands
OL-32830-01 Command Line Interface Reference Guide 174
5
User Guidelines
Internal usage VLANs (VLANs that are automatically allocated on routed ports) are
presented in the VLAN column by a port number and not by a VLAN ID.
Examples
Example 1 - Displays entire address table.
switchxxxxxx#
show mac address-table
Aging time is 300 sec
Example 2 - Displays address table entries containing the specified MAC address.
switchxxxxxx#
show mac address-table
address 00:3f:bd:45:5a:b1
Aging time is 300 sec
VLAN MAC Address Port Type
-------- --------------------- ---------- ----------
1 00:3f:bd:45:5a:b1 static gi14
5.27 show mac address-table count
To display the number of addresses present in the Forwarding Database, use the
show mac address-table count Privileged EXEC mode command.
Syntax
show mac address-table count
[vlan vlan | interface interface-id]
VLAN MAC Address Port Type
-------- --------------------- ---------- ----------
1 00:00:26:08:13:23 0 self
1 00:3f:bd:45:5a:b1 gi11 static
1 00:a1:b0:69:63:f3 gi12 dynamic
2 00:a1:b0:69:63:f3 gi13 dynamic
gi14
00:a1:b0:69:61:12
gi1
4
dynamic
To Next Page
Loading...
Need help?
General