Cisco 300 Series User Manual

Smartport Commands
845 OL-32830-01 Command Line Interface Reference Guide
44
switch set type to switch
router set type to router
ap set type to access point
switchxxxxxx(config)# macro auto processing type ap enabled
44.10 macro auto user smartport macro
The macro auto user smartport macro Global Configuration mode command links
user-defined Smartport macros to a Smartport type. This is done by replacing the
link to the built-in macro with the link to the user-defined macro. The no format of
the command returns the link to the default built-in Smartport macro.
Syntax
macro auto user smartport macro
smartport-type user-defined-macro-name
[
parameter-name value [ parameter-name value [ parameter - name value ]]]
no macro auto user smartport macro
smartport-type
Parameters
• smartport-type —Smartport type (range: printer, desktop, guest, server,
host, ip_camera, ip_phone, ip_phone_desktop, switch, router or wireless
access point (ap)).
• user-defined-macro-name —Specifies the user-defined macro name that
replaces the built-in Smartport macro.
• parameter-name value —Specifies the parameter name and its value in the
user-defined macro.
Default Configuration
parameter-name
value —Parameter’s default value. For instance, if the parameter
is the native VLAN, the default value is the default native VLAN.
Command Mode
Global Configuration mode

Cisco 300 Series Specifications

General

Brand	Cisco
Model	300 Series
Category	Switch
Language	English