Cisco 300 Series User Manual

System Management Commands
993 OL-32830-01 Command Line Interface Reference Guide
50
50.23 show ports leds configuration
To display whether the LEDs of the ports are enabled or disabled, use the show
port leds configuration EXEC mode command.
Syntax
show ports leds configuration
Parameters
This command has no arguments or keywords.
Command Mode
User EXEC mode
Examples
Example 1: The following example displays the status of the port’s LEDs when they
are turned on.
switchxxxxxx> show ports leds configuration
Port leds are not disabled
x
Example 2: The following example displays the status of the port LEDs when they
are turned off.
switchxxxxxx> show port leds configuration
Port leds are disabled
50.24 show users
To display information about the active users, use the show users EXEC mode
command.
Syntax
show users

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48