Cisco 300 Series User Manual

19
OL-32830-01 Command Line Interface Reference Guide 419
Green Ethernet
.1
19.1 green-ethernet energy-detect (global)
To enable Green-Ethernet Energy-Detect mode globally, use the green-ethernet
energy-detect Global Configuration mode command. To disable this feature, use
the no form of this command.
Syntax
green-ethernet energy-detect
no green-ethernet energy-detect
Parameters
This command has no arguments or keywords.
Default Configuration
Disabled.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# green-ethernet energy-detect
19.2 green-ethernet energy-detect
(interface)
Use the green-ethernet energy-detect Interface configuration mode command to
enable Green Ethernet-Energy-Detect mode on a port. Use the no form of this
command, to disable it on a port.

Cisco 300 Series Specifications

General

Brand	Cisco
Model	300 Series
Category	Switch
Language	English