Cisco 300 Series User Manual

User Interface Commands
1037 OL-32830-01 Command Line Interface Reference Guide
55
Syntax
do
command
Parameters
command—Specifies the EXEC-level command to execute.
Command Mode
All configuration modes
Example
The following example executes the show vlan Privileged EXEC mode command
from Global Configuration mode.
Example
switchxxxxxx(config)# do show vlan
switchxxxxxx(config)#
55.6 enable
To enter the Privileged EXEC mode, use the enable User EXEC mode command.
Vlan
Name
Ports Type Authorization
---- ---- ----- ---- -------------
11
gi11-4,Po1,Po2 other Required
22
gi11 dynamicGvrp Required
10
v0010 gi11 permanent Not Required
11
V0011 gi11,gi13 permanent Required
20 20
gi11 permanent Required
30 30
gi11,gi13 permanent Required
31 31
gi11 permanent Required
91 91
gi11,gi14 permanent Required
4093 guest-vlan gi11,gi13 permanent Guest

Cisco 300 Series Specifications

General

Brand	Cisco
Model	300 Series
Category	Switch
Language	English