Cisco 300 Series User Manual

System Management Commands
OL-32830-01 Command Line Interface Reference Guide 974
50
Examples
Example 1: The following example reloads the operating system.
switchxxxxxx> reload
This command will reset the whole system and disconnect your current session.
Do you want to continue? (y/n) [Y]
Example 2: The following example reloads the operating system in 10 minutes.
switchxxxxxx> reload in 10
This command will reset the whole system and disconnect your current session.
Reload is scheduled for 11:57:08 UTC Fri Apr 21 2012 (in 10 minutes). Do you
want to continue? (y/n) [Y]
Example 3: The following example reloads the operating system at 13:00.
switchxxxxxx> reload at 13:00
This command will reset the whole system and disconnect your current session.
Reload is scheduled for 13:00:00 UTC Fri Apr 21 2012 (in 1 hour and 3
minutes). Do you want to continue? (y/n) [Y]
Example 4: The following example cancels a reload.
switchxxxxxx> reload cancel
Reload cancelled.
50.4 resume
To enable switching to another open Telnet session, use the resume EXEC mode
command.
Syntax
resume [
connection ]

Cisco 300 Series Specifications

General

Model	Cisco 300 Series
Category	Switch
Dimensions	Varies by model
Weight	Varies by model
Power over Ethernet (PoE)	Available on select models
Management	Web-based GUI, SNMP, CLI
VLANs	Up to 256
Security Features	ACLs, 802.1X, Port Security
Humidity	10% to 90% non-condensing
Ports	8, 16, 24, 48