ACL Commands
OL-32830-01 Command Line Interface Reference Guide 134
4
Parameters
• start—Absolute time and date that the permit or deny statement of the
associated function going into effect. If no start time and date are specified,
the function is in effect immediately.
• end—Absolute time and date that the permit or deny statement of the
associated function is no longer in effect. If no end time and date are
specified, the function is in effect indefinitely.
• hh:mm—Time in hours (military format) and minutes (Range: 0–23, mm: 0–5)
• day—Day (by date) in the month. (Range: 1–31)
• month—Month (first three letters by name). (Range: Jan...Dec)
• year—Year (no abbreviation) (Range: 2000–2097)
Default Configuration
There is no absolute time when the time range is in effect.
Command Mode
Time-range Configuration mode
Example
switchxxxxxx(config)#
time-range http-allowed
switchxxxxxx(config-time-range)#
absolute
start 12:00 1 jan 2005
switchxxxxxx(config-time-range)#
absolute
end 12:00 31 dec 2005
4.13 periodic
Use the periodic Time-range Configuration mode command to specify a recurring
(weekly) time range for functions that support the time-range feature. Use the no
form of this command to remove the time limitation.
Syntax
periodic
day-of-the-week hh:mm to day-of-the-week hh:mm
no periodic
day-of-the-week hh:mm to day-of-the-week hh:mm
To Next Page
Loading...
Need help?
General