Cisco 300 Series User Manual

ACL Commands
135 OL-32830-01 Command Line Interface Reference Guide
4
periodic list hh:mm to hh:mm day-of-the-week1 [day-of-the-week2…
day-of-the-week7]
no periodic list hh:mm to hh:mm day-of-the-week1 [day-of-the-week2…
day-of-the-week7]
periodic list hh:mm to hh:mm all
no periodic list hh:mm to hh:mm all
Parameters
• day-of-the-week—The starting day that the associated time range is in
effect. The second occurrence is the ending day the associated statement
is in effect. The second occurrence can be the following week (see
description in the User Guidelines). Possible values are: mon, tue, wed, thu,
fri, sat, and sun.
• hh:mm—The first occurrence of this argument is the starting hours:minutes
(military format) that the associated time range is in effect. The second
occurrence is the ending hours:minutes (military format) the associated
statement is in effect. The second occurrence can be at the following day
(see description in the User Guidelines). (Range: 0–23, mm: 0–59)
• list day-of-the-week1 —Specifies a list of days that the time range is in
effect.
Default Configuration
There is no periodic time when the time range is in effect.
Command Mode
Time-range Configuration mode
User Guidelines
The second occurrence of the day can be at the following week, e.g.
Thursday–Monday means that the time range is effective on Thursday, Friday,
Saturday, Sunday, and Monday.
The second occurrence of the time can be on the following day, e.g. “22:00–2:00”.
Example
switchxxxxxx(config)# time-range http-allowed
switchxxxxxx(config-time-range)# periodic mon 12:00 to wed 12:00

Cisco 300 Series Specifications

General

Brand	Cisco
Model	300 Series
Category	Switch
Language	English