Cisco 300 Series User Manual

Clock Commands
OL-32830-01 Command Line Interface Reference Guide 234
9
Default Configuration
Coordinated Universal Time (UTC) or Greenwich Mean Time (GMT), which is the
same:
• Offsets are 0.
• Acronym is empty.
Command Mode
Global Configuration mode
User Guidelines
The system internally keeps time in UTC, so this command is used only for display
purposes and when the time is manually set.
Example
switchxxxxxx(config)# clock timezone abc +2 minutes 32
9.7 periodic
To specify a recurring (weekly) time range for functions that support the
time-range feature, use the periodic command in Time-range Configuration mode.
To restore the default configuration, use the no form of this command.
Syntax
periodic
day-of-the-week hh:mm to day-of-the-week hh:mm
no periodic day-of-the-week hh:mm to day-of-the-week hh:mm
periodic list hh:mm to hh:mm day-of-the-week1 [ day-of-the-week2…
day-of-the-week7
]
no periodic list hh:mm to hh:mm day-of-the-week1 [ day-of-the-week2…
day-of-the-week7
]
periodic list hh:mm to hh:mm all
no periodic list hh:mm to hh:mm all

Cisco 300 Series Specifications

General

Brand	Cisco
Model	300 Series
Category	Switch
Language	English