Cisco 300 Series User Manual

Telnet, Secure Shell (SSH) and Secure Login (Slogin) Commands
1011 OL-32830-01 Command Line Interface Reference Guide
52
Use the no user-key command to remove an SSH user and the associated public
key.
Syntax
user-key username {rsa | dsa}
no user-key
username
Parameters
• username —Specifies the remote SSH client username. (Length: 1–48
characters)
• rsa—Specifies that the RSA key pair is manually configured.
• dsa—Specifies that the DSA key pair is manually configured.
Default Configuration
No SSH public keys exist.
Command Mode
SSH Public Key-string Configuration mode
User Guidelines
After entering this command, the existing key, if any, associated with the user will be deleted.
You must follow this command with the key-string command to configure the key to the user.
Example
The following example enables manually configuring an SSH public key for SSH
public key-chain bob.
switchxxxxxx(config)# crypto key pubkey-chain ssh
switchxxxxxx(config-keychain)# user-key bob rsa
switchxxxxxx(config-keychain-key)# key-string row
AAAAB3NzaC1yc2EAAAADAQABAAABAQCvTnRwPWl

Cisco 300 Series Specifications

General

Brand	Cisco
Model	300 Series
Category	Switch
Language	English