Eaton easyE4 series User Manual

6. Function blocks
6.4 Timing and counter relay example
6.4 Timing and counter relay example
A warning light flashes when the counter reaches 10. In this example the function
blocks C01 and T01 are wired in the standard circuit diagram and their inputs and out-
puts are defined.
Figure 216: Hardwiring with relays
Figure 217: Wiring with easyE4
Enter circuit diagram
Enter the following circuit diagram while using the EDP programming language.
454
easyE4 11/18 MN050009 EN www.eaton.com

Eaton easyE4 series Specifications

General

Brand	Eaton
Model	easyE4 series
Category	Relays
Language	English