9. easyE4 inside
9.2 Transfering an existing circuit diagram
9.2 Transfering an existing circuit diagram
Existing easy.e60 programs can be imported with easySoft 7.
When importing existing programs / projects, you will be able to select either the EDP
or LD programming language:
EDP programs will be imported in their entirety, and their flow structure will be com-
patible with previous devices.
If the program / project is instead imported into LD, the first mapping assignment will be
to an intermediate marker. Once the last mapping assignment to an intermediate
marker is completed, the intermediate markers will be mapped to the actual M, Q, etc.
function block operands. This ensures that the program will keep the same flow struc-
ture as the previous devices.
easySoft 7 will output an import log that specifies how the inputs, outputs, and markers
have been rewired.
If a project featuring an easyE4 features MFD-CP8/10 stations
as well, the MFD devices will be shown as "other" NET sta-
tions.
easySoft 7 will use the previous devices and the operands
used as a basis in order to optimize the easyE4 hardware and
the new xyz.e70 program.
504
easyE4 11/18 MN050009 EN www.eaton.com
To Next Page
Loading...
Need help?
General