Eaton easyE4 series User Manual

3. Commissioning
3.4 Overview of switch-on behavior
Figure 51: Startup procedure with device initialization
RUN start: The device should be able to start without easySoft 7
Allow overwriting via card: If an SD card with a starting program has been inserted, the device
should load from the card
Options set again, since they could be overwritten by the loaded program
86
easyE4 11/18 MN050009 EN www.eaton.com

Eaton easyE4 series Specifications

General

Brand	Eaton
Model	easyE4 series
Category	Relays
Language	English