HEIDENHAIN MANUALPLUS 620 User Manual

HEIDENHAIN MANUALplus 620 173
4.1 Programming in DIN/ISO Mode
Examples:
 X20 [Absolute dimension]
 Zi–35.675 [Incremental dimension]
 X? [Simple geometry programming]
 X#l1 [Variable programming]
 X(#g12+1) [Variable programming]
 X(37+2)*SIN(30) [Mathematical expression]
 X(20*_pi) [Expression with constant]
Creating, editing and deleting NC blocks
Create NC block:
U Press the INS key. The MANUALplus creates a new
NC block below the cursor position.
U Alternatively you can program the NC command directly. The
MANUALplus creates a new NC block or inserts the NC command
in the existing NC block.
Delete NC block:
U Position the cursor on the NC block to be deleted.
U Press the DEL key. The MANUALplus deletes the NC
block.
Add an NC element:
U Position the cursor on an element of the NC block (NC block
number, G or M command, address parameter, etc.),
U Insert NC element (G, M, T function, etc.).
Change NC element:
U Position the cursor on an element of the NC block (NC block
number, G or M command, address parameter, etc.) or the section
code.
U Press ENTER or double-click with the left mouse
key. The MANUALplus activates a dialog box which
displays the block number, the number of the G or
M function, or the address parameters, which can
then be edited.
Delete NC element:
U Position the cursor on an element of the NC block (NC block
number, G or M command, address parameter, etc.),
U Press the DEL key. The NC element highlighted by the
cursor and all the related elements are deleted.
Example: If the cursor is located on a G command, the
address parameters are also deleted.

HEIDENHAIN MANUALPLUS 620 Specifications

General

Brand	HEIDENHAIN
Model	MANUALPLUS 620
Category	Control Systems
Language	English