HEIDENHAIN MANUALPLUS 620 User Manual

440 Overview of Units
6.3 Units—”Predrilling in C Axis” Group
6.3 Units—”Predrilling in C
Axis” Group
“Predrilling in C-axis, face” group
“Predrilling in C-axis, lateral surface” group
Unit Description Page
DRILL_STI_KON_C G840 Predrill face, contour milling, figures
Determine the predrilling position and machine a hole
Page 81
DRILL_STI_840_C G840 Predrill face, ICP contour milling
Determine the predrilling position and machine a hole
Page 83
DRILL_STI_TASC G845 Predrill face, pocket milling, figures
Determine the predrilling position and machine a hole
Page 85
DRILL_STI_845_C G845 Predrill face, ICP pocket milling
Determine the predrilling position and machine a hole
Page 87
Unit Description Page
DRILL_MAN_KON_C G840 Predrill latrl., contour milling, figures
Determine the predrilling position and machine a hole
Page 88
DRILL_MAN_840_C G840 Predrill lateral surf., ICP contour milling
Determine the predrilling position and machine a hole
Page 90
DRILL_MAN_TAS_C G845 Predrill lateral surf., pocket milling, figures
Determine the predrilling position and machine a hole
Page 92
DRILL_MAN_845_C G845 Predrill lateral surf., ICP pocket milling
Determine the predrilling position and machine a hole
Page 94

HEIDENHAIN MANUALPLUS 620 Specifications

General

Brand	HEIDENHAIN
Model	MANUALPLUS 620
Category	Control Systems
Language	English