110
10.0.1.1 10.0.1.2 Vlan10
10.0.11.1 10.0.11.2 Vlan20
Table 30 Command output
Field Descri
tion
Area Area to which the backup next hops belong.
Candidate nexthop count Number of backup next hops.
NextHop Backup next hop address.
IntIP IP address of the output interface.
Interface Output interface.
display ospf graceful-restart
Use display ospf graceful-restart to display GR information for an OSPF process.
Syntax
display ospf [ process-id ] graceful-restart [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Without this argument, the
command displays GR information for all processes.
verbose: Displays detailed GR information. Without this keyword, the command displays brief GR
information.
Examples
# Display detailed GR information.
<Sysname> display ospf graceful-restart verbose
OSPF Process 1 with Router ID 1.1.1.1
Graceful Restart information
Graceful Restart capability : Enable(IETF)
Graceful Restart support : Planned and un-planned,Partial
Helper capability : Enable(IETF)
Helper support : Planned and un-planned(IETF),Strict LSA check
Current GR state : Normal
Graceful Restart period : 40 seconds
Number of neighbors under Helper: 0
Number of restarting neighbors : 0
Last exit reason:
To Next Page
Loading...
Need help?
General
