HP 5920 Series User Manual

386
[Sysname] bgp 100
[Sysname-bgp] ip vpn-instance vpn1
[Sysname-bgp-vpn1] address-family ipv6 unicast
[Sysname-bgp-ipv6-vpn1] preference 20 20 200
reflect between-clients
Use reflect between-clients to enable route reflection between clients.
Use undo reflect between-clients to disable this function.
Syntax
reflect between-clients
undo reflect between-clients
Default
Route reflection between clients is enabled.
Views
BGP IPv4 unicast address family view, BGP-VPN IPv4 unicast address family view, BGP VPNv4 address
family view, BGP IPv6 unicast address family view, BGP VPNv6 address family view, BGP L2VPN
address family view
Predefined user roles
network-admin
Usage guidelines
When a route reflector is configured, and the clients of a route reflector are fully meshed, route reflection
is unnecessary because it consumes more bandwidth resources. You can use the undo reflect
between-clients command to disable route reflection instead of modifying network configuration or
changing network topology.
After route reflection is disabled between clients, routes can still be reflected between a client and a
non-client.
Examples
# In BGP IPv4 unicast address family view, disable route reflection between clients.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] address-family ipv4 unicast
[Sysname-bgp-ipv4] undo reflect between-clients
# In BGP VPNv4 address family view, disable route reflection between clients.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] address-family vpnv4
[Sysname-bgp-vpnv4] undo reflect between-clients
# In BGP-VPN IPv4 unicast address family view, disable route reflection between clients.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ip vpn-instance vpn1
[Sysname-bgp-vpn1] address-family ipv4 unicast

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English