HP 5920 Series User Manual

421
Number of trigger updates sent: 1
Table 100 Command output
Field Descri
p
tion
Public VPN-instance name/Private VPN-instance
name
Public network or VPN where the RIPng process runs.
RIPng process RIPng process ID.
Preference RIPng preference.
Checkzero
Indicates whether zero field check for RIPng packet
headers is enabled.
Default Cost Default metric of redistributed routes.
Maximum number of balanced paths Maximum number of load-balanced routes.
Update time RIPng update interval, in seconds.
Timeout time RIPng timeout interval, in seconds.
Suppress time RIPng suppress interval, in seconds.
Garbage-Collect time RIPng garbage collection interval, in seconds.
display ripng database
Use display ripng database to display all active routes in the advertising database for a RIPng process.
RIPng advertises active routes in RIPng routing updates.
Syntax
display ripng process-id database [ ipv6-address prefix-length ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies a RIPng process by its ID in the range of 1 to 65535.
ipv6-address prefix-length: Specifies an IPv6 address. The ipv6-address argument specifies an IPv6
address. The prefix-length argument specifies a prefix length in the range of 0 to 128.
Examples
# Display active routes for RIPng process 100.
<Sysname> display ripng 100 database
1::/64,
cost 0, RIPng-interface
10::/32,
cost 0, imported
2::2/128,
via FE80::20C:29FF:FE7A:E3E4, cost 1

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English