HP 5920 Series - Display Isis Route

204
Field Descri
p
tion
Type
Redistributed route type:
• Direct.
• IS-IS.
• Static.
• OSPF.
• BGP.
• RIP.
IPV4 Destination IPv4 destination address.
IntCost Internal cost of the route.
ExtCost External cost of the route.
Tag Tag value.
State Indicates whether the route is valid.
display isis route
Use display isis route to display IS-IS IPv4 routing information.
Syntax
display isis route [ ipv4 [ ip-address mask-length ] ] [ [ level-1 | level-2 ] | verbose ] * [ process-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv4: Displays IS-IS IPv4 routing information (the default).
ip-address mask-length: Displays IS-IS IPv4 routing information for the specified IP address. The
mask-length argument is in the range of 0 to 32.
verbose: Displays detailed IS-IS IPv4 routing information. Without this keyword, the command displays
brief IS-IS IPv4 routing information
process-id: Displays IS-IS IPv4 routing information for an IS-IS process specified by its ID in the range of
1 to 65535.
level-1: Displays Level-1 IS-IS routes.
level-2: Displays Level-2 IS-IS routes.
Usage guidelines
If no level is specified, this command displays both Level-1 and Level-2 routing information.
If no IS-IS process ID is specified, this command displays routing information for all IS-IS process IDs.
Examples
# Display brief IS-IS IPv4 routing information.