476
Field Descri
tion
Cost Route cost value.
Nexthop Next hop address.
Interface Output interface.
AdvRouter Advertising router.
Area Area ID.
Tag Tag of external routes.
Preference Route preference.
Total Total number of routes.
Intra area Number of intra-area routes.
Inter area Number of inter-area routes.
ASE Number of Type-5 external routes.
NSSA Number of Type-7 external routes.
display ospfv3 spf-tree
Use display ospfv3 spf-tree to display OSPFv3 topology information.
Syntax
display ospfv3 [ process-id ] [ area area-id ] spf-tree [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. If you do not specify this
argument, the command displays topology information for all OSPFv3 processes.
area area-id: Specifies an OSPFv3 area by its ID, which is an IP address or a decimal integer in the
range of 0 to 4294967295 that is translated into the IP address format. If you do not specify this option,
the command displays topology information for all OSPFv3 areas.
verbose: Displays detailed OSPFv3 topology information. If you do not specify this keyword, the
command displays brief OSPFv3 topology information.
Examples
# Display brief topology information for area 0 in OSPFv3 process 1.
<Sysname> display ospfv3 1 area 0 spf-tree
OSPFv3 Process 1 with Router ID 1.1.1.1
Flags: S-Node is on SPF tree R-Node is directly reachable
To Next Page
Loading...
Need help?
General
