HP 5920 Series User Manual

5
Field Descri
p
tion
State
Route status:
• Active—Active unicast route.
• Adv—Route that can be advertised.
• Inactive—Inactive route.
• NoAdv—Route that the router must not advertise.
• Vrrp—Routes generated by VRRP.
• Nat—Routes generated by NAT.
• TunE—Tunnel.
OrigTblID Original routing table ID.
OrigVrf Original VPN that the route belongs to.
TableID ID of the routing table.
OrigAs Original AS number.
NibID ID of the next hop.
LastAs Last AS number.
AttrID Attribute ID.
Neighbor Address of the neighbor determined by the routing protocol.
Flags Flags of the route.
OrigNextHop Next hop address of the route.
RealNextHop Real next hop of the route.
BkLabel Backup label.
BkNexthop Backup next hop.
Interface Output interface for packets to be forwarded along the route.
BkTunnel ID Backup tunnel ID.
BkInterface Backup output interface.
FtnIndex Index of the FTN entry.
Summary Count Number of routes.
display ip routing-table acl
Use display ip routing-table acl to display information about routes permitted by a basic ACL.
Syntax
display ip routing-table [ vpn-instance vpn-instance-name ] acl acl-number [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English