13
display ip routing-table statistics
Use display ip routing-table statistics to display IPv4 route statistics.
Syntax
display ip routing-table [ vpn-instance vpn-instance-name ] statistics
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. Without this option, the command displays route statistics for the public network.
Examples
# Display IPv4 route statistics for the public network.
<Sysname> display ip routing-table statistics
Proto route active added deleted
DIRECT 12 12 30 18
STATIC 3 3 5 2
RIP 0 0 0 0
OSPF 0 0 0 0
ISIS 0 0 0 0
BGP 0 0 0 0
Total 15 15 35 20
Table 3 Command output
Field Descri
tion
Proto Protocol that installed the route.
route Number of routes installed by the protocol.
active Number of active routes.
added
Number of routes added to the routing table after the router started up or the routing table was
last cleared.
deleted Number of routes marked as deleted, which will be cleared after a period.
Total Total number of routes.
display ipv6 rib attribute
Use display ipv6 rib attribute to display route attribute information in the IPv6 RIB.
Syntax
display ipv6 rib attribute [ attribute-id ]
To Next Page
Loading...
Need help?
General
