155
translator-stability-interval value: Specifies the stability interval of the translator. During the interval, the
translator can maintain its translating capability after another device becomes the new translator. The
value argument is the stability interval in the range of 0 to 900 seconds and defaults to 0. A value of 0
means the translator does not maintain its translating capability when a new translator arises.
Usage guidelines
All routers attached to an NSSA area must be configured with the nssa command in area view.
Examples
# Configure Area 1 as an NSSA area.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 1
[Sysname-ospf-100-area-0.0.0.1] nssa
Related commands
default-cost (OSPF view)
opaque-capability enable
Use opaque-capability enable to enable opaque LSA advertisement and reception.
Use undo opaque-capability to disable opaque LSA advertisement and reception.
Syntax
opaque-capability enable
undo opaque-capability
Default
The feature is enabled.
Views
OSPF view
Predefined user roles
network-admin
Usage guidelines
After the opaque LSA advertisement and reception is enabled, OSPF can receive and advertise Type-9,
Type-10, and Type-11 opaque LSAs.
Examples
# Disable opaque LSA advertisement and reception.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] undo opaque-capability
ospf
Use ospf to enable OSPF and enter OSPF view.
Use undo ospf to disable OSPF.
To Next Page
Loading...
Need help?
General
