HP 5920 Series User Manual

78
Syntax
rip metricin [ route-policy route-policy-name ] value
undo rip metricin
Default
The additional metric of an inbound route is 0.
Views
Interface view
Predefined user roles
network-admin
Parameters
route-policy route-policy-name: Uses the specified routing policy to add an additional metric for the
routes matching it. The route-policy-name argument is a case-sensitive string of 1 to 63 characters.
value: Adds an additional metric to inbound routes, in the range of 0 to 16.
Usage guidelines
When a valid RIP route is received, the system adds a metric to it and then installs it into the routing table.
The metric of the route received on the configured interface is then increased. If the sum of the additional
metric and the original metric is greater than 16, the metric of the route will be 16.
If a routing policy is referenced with the route-policy keyword, the following operations can be
performed:
• Routes matching the policy are added with the metric specified in the apply cost command
configured in the policy. Routes not matching it are added with the metric specified in the rip
metricin command. The rip metricin command does not support the + or – keyword—used to add
or reduce a metric—specified in the apply cost command.
• If the apply cost command is not configured in the policy, all the inbound routes are added with the
metric specified in the rip metricin command.
Examples
# Configure VLAN-interface 10 to add a metric of 6 to the inbound route 1.0.0.0/8 and to add a metric
of 2 to other inbound routes.
<Sysname> system-view
[Sysname] ip prefix-list 123 permit 1.0.0.0 8
[Sysname] route-policy abc permit node 0
[Sysname-route-policy-abc-10] if-match ip address prefix-list 123
[Sysname-route-policy-abc-10] apply cost 6
[Sysname-route-policy-abc-10] quit
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] rip metricin route-policy abc 2
Related commands
apply cost
rip metricout
Use rip metricout to configure an interface to add a metric to outbound routes.

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English