454
1000:4:11:3::/96 1
Table 108 Command output
Field Descri
tion
Destination Destination address of a summarized route.
Metric Metric of a summarized route.
display ospfv3 asbr-summary
Use display ospfv3 asbr-summary to display ASBR summary route information.
NOTE:
This command is available in Release 2311P04 and later versions.
Syntax
display ospfv3 [ process-id ] asbr-summary [ ipv6-address prefix-length ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535. If you do not specify this
argument, the command displays information about ASBR summary routes for all OSPFv3 processes.
ipv6-address prefix-length: Specifies an IPv6 address. The ipv6-address argument specifies an IPv6 prefix.
The prefix-length argument specifies a prefix length in the range of 0 to 128. If you do not specify this
argument, the command displays information about all ASBR summary routes.
verbose: Displays detailed ASBR summary route information. If you do not specify this keyword, the
command displays brief ASBR summary route information.
Examples
# Display brief ASBR summary route information in OSPFv3 process 1.
<Sysname> display ospfv3 1 asbr-summary
OSPFv3 Process 1 with Router ID 2.2.2.2
Total summary addresses: 1
Prefix : 1000:4::/32
Status : Advertise
NULL0 : Active
Cost : 1 (Configured)
Tag : (Not configured)
Nssa-only : (Not configured)
To Next Page
Loading...
Need help?
General
