461
Field Descri
tion
Source Source address of the sham link.
Destination Destination address of the sham link.
display ospfv3 interface
Use display ospfv3 interface to display OSPFv3 interface information.
Syntax
display ospfv3 [ process-id ] interface [ interface-type interface-number | verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535.
interface-type interface-number: Specifies an interface by its type and number.
verbose: Displays detailed information about all OSPFv3 interfaces.
Usage guidelines
If no process is specified, this command displays brief OSPFv3 interface information for all processes.
If you do not provide the interface-type interface-number argument or the verbose keyword, this
command displays brief information about all OSPFv3 interfaces.
Examples
# Display OSPFv3 information about VLAN-interface 1.
<Sysname> display ospfv3 interface vlan-interface 1
OSPFv3 Process 1 with Router ID 1.1.1.1
Area: 0.0.0.0
-------------------------------------------------------------------------
Vlan-interface1 is up, line protocol is up
Interface ID 65697 Instance ID 0
IPv6 prefixes
fe80::200:12ff:fe34:1 (Link-Local address)
2001::1
Cost: 1 State: BDR Type: Broadcast MTU: 1500
Priority: 1
Designated router: 2.2.2.2
Backup designated router: 1.1.1.1
Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit delay 1
Neighbor count is 1, Adjacent neighbor count is 1
To Next Page
Loading...
Need help?
General
