350
Examples
# I n B G P vi ew, e n a bl e B G P ro u t e re f re s h fo r p e e r 1.1.1.1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 1.1.1.1 as-number 100
[Sysname-bgp] peer 1.1.1.1 capability-advertise route-refresh
# In BGP-VPN instance view, enable BGP route refresh for peer 1::1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ip vpn-instance vpn1
[Sysname-bgp-vpn1] peer 1::1 as-number 200
[Sysname-bgp-vpn1] peer 1::1 capability-advertise route-refresh
Related commands
• display bgp peer
• peer capability-advertise conventional
• peer keep-all-routes
• refresh bgp ipv4 unicast
• refresh bgp ipv6 unicast
peer capability-advertise suppress-4-byte-as
Use peer capability-advertise suppress-4-byte-as to enable 4-byte AS number suppression.
Use undo peer capability-advertise suppress-4-byte-as to disable the function.
Syntax
peer { group-name | ip-address | ipv6-address } capability-advertise suppress-4-byte-as
undo peer { group-name | ip-address | ipv6-address } capability-advertise suppress-4-byte-as
Default
The 4-byte AS number suppression function is disabled.
Views
BGP view, BGP-VPN instance view
Predefined user roles
network-admin
Parameters
group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters. The peer
group must have been created.
ip-address: Specifies a peer by its IP address. The peer must have been created.
ipv6-address: Specifies a peer by its IPv6 address. The peer must have been created.
Usage guidelines
BGP supports 4-byte AS numbers. The 4-byte AS number occupies four bytes, in the range of 1 to
4294967295. By default, a device sends an Open message to the peer device for session establishment.
The Open message indicates that the device supports 4-byte AS numbers. If the peer device supports
To Next Page
Loading...
Need help?
General
