HP 5920 Series User Manual

469
Field Descri
p
tion
Upgrade phase
NSR phase:
• Normal—Normal status.
• Preparation—Upgrade preparation phase.
• Smooth—Upgrade phase.
• Precalculation—Route pre-calculation phase.
• Calculation—Route calculation phase.
• Redistribution—Route redistribution phase.
display ospfv3 peer
Use display ospfv3 peer to display information about OSPFv3 neighbors.
Syntax
display ospfv3 [ process-id ] [ area area-id ] peer [ [ interface-type interface-number ] [ verbose ] |
peer-router-id | statistics ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535.
area area-id: Specifies an area by its ID, an IPv4 address or a decimal integer in the range of 0 to
4294967295 that is translated into an IPv4 address by the system.
interface-type interface-number: Specifies an interface by its type and number.
verbose: Displays detailed neighbor information.
peer-router-id: Specifies a neighbor.
statistics: Displays OSPFv3 neighbor statistics.
Usage guidelines
If no process is specified, this command displays neighbor information for all processes.
If no area is specified, this command displays neighbor information for all areas.
If no interface or no neighbor is specified, this command displays neighbor information for all interfaces.
Examples
# Display the neighbor information for OSPFv3 process 1 on an interface.
<Sysname> display ospfv3 1 peer vlan-interface 1
OSPFv3 Process 1 with Router ID 1.1.1.1
Area: 0.0.0.1
-------------------------------------------------------------------------

HP 5920 Series Specifications

General

Brand	HP
Model	5920 Series
Category	Switch
Language	English